One Job • One Person • Just Right for Both    Follow CTR Jobs on Twitter Visit CTR on Facebook All CTR Jobs RSS Feed
 

MECHANICAL TECHNICIANS: TIG / MIG / Flux Welding

2 CONTRACT POSITIONS for 6 Months

INDUSTRY: MANUFACTURING

LOCATION: NEWPORT NEWS

PAY RATE: $23 - $30.50 per Hour (An additional $10 per hour will be available for non-local candidates)

 

SUMMARY:

Perform welding processes on aluminum and steel parts and assemble to required tolerances using welding metals and metal alloys. Determine layout and weld parts according to drawings and specifications. 

     

    REQUIREMENTS:

     

    • 5 years of Welding (TIG, MIG, Flux)
    • Welding Certification preferred

     

    EOE   M/F

     

     

     

     

     

      



    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    LOGISTICS COORDINATOR

    A TEMP-HIRE POSITIONN (after 90 Days)

    INDUSTRY: MANUFACTURING

    LOCATION: HAMPTON, VA

    PAY RATE: $12- $14 per hour

    Hours: 7am-4pm or 8am-5pm, leave early one day a week on alternating weeks 

     

    SUMMARY: 

    Coordinate ocean and airfreight imports from factories in Europe for manufacturing divisions within the US. Spend 3-4 hours daily on the phone with inbound and outbound calls.

     

     REQUIREMENTS:

    • Experience working in Transportation / Logistics or Freight Forwarding industries strongly preferred
    • Import / Export Administration experience
    • Intermediate level MS Word and Excel skills (data entry, hyperlinks)
    • Experience with customs / maritime highly preferred
    • ERP software experience

    EOE   M/F



    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    MECHANICAL DESIGNER 1: Pro-E and Hydraulics

    A DIRECT-HIRE POSITION with Excellent Benefits

    INDUSTRY: MANUFACTURING

    LOCATION: NEWPORT NEWS, VA

    SALARY RANGE: $50K - $75K 

     

    SUMMARY: 

    Will participate in the design and development of mechanical components and systems for use in heavy equipment. Will create new designs as well as designs for product improvement. Seeking local candidates.

     

    REQUIREMENTS:

    • Associate degree in Drafting and Design, or 4 years of related experience and/or training, or equivalent combination
    • Must have Pro-E experience and knowledge of Hydraulics
    • 2 years of Pro-E modeling experience in Mechanical Engineering field
    • Experience with AutoCAD
    • Knowledge of Algebra, Geometry and Trigonometry
    • Ability to calculate area, volume, and weight
    • Knowledge of BaaN system, BOM (Bill of Material), and inventory control
    • Able to check drawings

    EOE  M/F

     



    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    MAINTENANCE TECHNICIANS: INDUSTRIAL AUTOMATION

    2 DIRECT-HIRE POSITIONS with Excellent Benefits

    INDUSTRY: MANUFACTURING

    LOCATION: NEWPORT NEWS

    PAY RATE: $20.40 per hour to start 



    SUMMARY: 

    Seeking Maintenance Technicians to install, repair, and maintain automated production equipment and machinery. Must have experience with automation and PLC Programming. Must be available for night shift (night shift is strongly preferred) and must work every other weekend.

     

    EOE M/F 



    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    MACHINE OPERATORS: MANUFACTURING

    5 TEMP-HIRE POSITIONS (after 90 days)

    INDUSTRY: MANUFACTURING

    LOCATION: WILLIAMSBURG

    PAY RANGE: $9.25 - $10.25


    Second Shift:      2pm - 10:30pm

    Third Shift:           10:30pm - 6:30am  

     

    SUMMARY:

     

    Pick and place glass components into multiple CNC machines.  Requires careful handling of glass components, loading into slotted carriers.  Perform minor visual inspections and basic data entry. 

      

    REQUIREMENTS: 

    • Prior Manufacturing experience
    • Experience as Machine Operator  
    • QA Inspection experience
    • Attention to detail is a must
    • Willingness and ability to learn

    EOE M/F

     


    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    ENGINEERING COORDINATOR: Bill of Materials

    A DIRECT-HIRE POSITION

    INDUSTRY: MANUFACTURING

    LOCATION: NORFOLK, VA

     

    SUMMARY:

    Will be in charge of verifying and documenting materials and spare parts. Will be tracking supplier bills of materials. Will correct discrepancies and update records to reflect product changes and upgrades.

     

     REQUIREMENTS:

    • Bachelor's degree and 3 years of related technical experience or equivalent combination of education and experience
    • Proficiency in MS Access, Excel, Word
    • Ability to interpret engineering drawings, schematics, diagrams, and technical illustrations
    • Experience working with bills of material
    • CAD experience preferred
    • Experience working with engineering drawings and bills of materials in a manufacturing setting desired
    • Original equipment and/or aftermarket manufacturing experience preferred
    • Able to travel domestically and abroad up to 20% of the time
    • Valid driver's license and ability to obtain passport

    EOE  M/F

     

     

     

     

     

     

     

     

     



    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    PROJECT LEAD: LOGISTICS & WAREHOUSING

    A DIRECT-HIRE POSITION with Excellent Benefits

    INDUSTRY: MANUFACTURING

    LOCATION: NORFOLK, VA

    SALARY RANGE: $50K - $75K

     

    SUMMARY:

    Seeking a Warehouse Project Lead with full cycle implementation, ERP, and WMS experience, who will lead and coordinate specific projects for global manufacturer's warehousing and logistics system.

    Will be in charge of training, coordination, and implementation. 

     

    REQUIREMENTS:

    • Associate degree and 4 years of Logistics / Warehouse experience OR 8 years of relevant work experience
    • Previous experience with ERP and WMS system is strongly preferred
    • APICS CPIM certification is a plus
    • Working knowledge of BaaN, or equivalent ERP/WMS system, system integration and barcoding
    • Familiarity with relational databases preferred
    • Ability to travel within the US and abroad up to 10% of the time
    • Ability to obtain valid driver's license and passport

     

    EOE M/F 

     

     

     

     

     

     



    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    SHIPPING & RECEIVING CLERK: ELECTRONICS 

    A TEMP-HIRE POSITION

    INDUSTRY: MANUFACTURING

    LOCATION: HAMPTON 

     

    SUMMARY: 

    Seeking a Shipping & Receiving Clerk who will be performing administrative and physical tasks associated with storing, shipping, receiving, and distributing materials, parts, supplies, and equipment.

    • Checks received goods from purchase orders/invoices
    • Maintains records of all received & shipped goods and discard defective items
    • Posts shipping charges & weights and prepare them for shipping
    • Arranges kitting packages for production
    • Inspects, distributes, and stocks items in inventory and manufacturing lines

     

    REQUIREMENTS:

    • High school diploma or GED
    • Prior experience with electronic parts a plus
    • 1-2 years experience with stockrooms, inventory management, and physical inventory
    • Able t count, add and subtract with or without the use of a calculator
    • Ability to lift up to 30lbs
    • Must be good at following oral and written directions
    • Clean background
    • Pass drug screening

    EOE

     


    Must-have Qualifications:

       




      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      PRODUCTION SUPERVISORS: Sheet Metal Shop

      2 DIRECT HIRE POSITIONS

      INDUSTRY: MANUFACTURING

      LOCATION: NEWPORT NEWS

      1st Shift Position: 7am-3:30pm         Overtime Available

      PAY RANGE: $40K - $60K

       

      SUMMARY:

      Will be responsible for managing all production personnel with the goal of efficient, accurate production in a short lead time.  

       

      REQUIREMENTS:

      • Sheet Metal and Job Shop Experience required
      • Experience supervising production in a fast-paced environment is preferred
      • Ability to manage production employees' activities, and assisting production employees, with the goal of efficient, accurate production in a short lead time
      • Able to evaluate plant resources, organize, plan, direct and manage production staff
      • Excellent communication skills
      • Experience / knowledge in the following would be helpful: CNC Turret Punch Press, CNC Laser, CNC Press Brake, Welding, CNC Machining, Powder Coating, Assembly
      • Ability to use E-2 by Shoptech software, Microsoft Excel, and e-mail.
      • Clean background required

       

      EOE M/F 



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      HVAC LEAD INSTALLER

      A TEMP-HIRE POSITION, after 90 Days

      INDUSTRY: RESIDENTIAL HEATING & AIR CONDITIONING

      LOCATION: SMITHFIELD

      Work Schedule: Mondays - Fridays, occasionally Saturdays

       

       
       SUMMARY:

      Residential Heating and Air Conditioning / HVAC company has an immediate need for an HVAC Lead Installer experienced with installing and change outs. Certification required. Seeking an experienced, good installer who will train the crew in residential installations. Will be serving customers throughout Hampton Roads. After being hired permanently, may be asked on occasion to drive company vehicle.

         

      REQUIREMENTS:

      • Must have Lead HVAC Installer experience 
      • Must be able to train the crew in residential installation
      • AC certification required
      • Knowledge of proper residential change out
      • Knowledge of split systems
      • Must have driver's license and reasonably clean driving record

       

       EOE  M/F

       

       

       



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      HVAC SERVICE TECHNICIANS: INDUSTRIAL & COMMERCIAL 

      SEVERAL TEMP-HIRE POSITIONS

      INDUSTRY: INDUSTRIAL & COMMERCIAL CONSTRUCTION

      LOCATION: CHESAPEAKE, VA

       

      PAY RANGE: Up to $32 per Hour

      Some Relocation Assistance is Available for Non-Local Candidates 

       

      Lots of Overtime Available 

       

      SUMMARY:

      Service Technician will be responsible for operating, repairing, and maintaining equipment including: HVAC equipment, building control system, systems involving electric and pneumatic air flow, water flow, gas/electric heating and cooling equipment, boilers, valves, apparatus and lines used in the distribution of heated, chilled or processed water, building automation system, variable frequency drive units, and computerized Maintenance Management Systems.

       

      REQUIREMENTS: 

      • High School diploma / GED
      • Minimum 10 years of HVAC service experience
      • HVAC Journeyman / Master certification preferred.
      • Knowledge of basic electricity & electrical and control systems
      • Ability to read and work from blueprints, specifications, and schematics
      • Military experience a plus
      • Must have a satisfactory driving record
      • Able to pass background check
      • Pass drug screening

       

      EOE M/F 

       



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      HVAC LEAD SERVICE TECHNICIAN

      A TEMP-HIRE POSITION, after 90 Days

      INDUSTRY: RESIDENTIAL HEATING & AIR CONDITIONING

      LOCATION: SMITHFIELD

      PAY RANGE: $20-25 or higher per Hour 

      Work Schedule: Mondays - Fridays, occasionally Saturdays

       

       
       SUMMARY:

      Residential Heating and Air Conditioning / HVAC company has an immediate need for an HVAC Lead Service Technician experienced with installing and change outs. Certification required. Seeking an experienced, good service technician who will train the crew in residential maintenance and repair. Will be serving customers throughout Hampton Roads. After being hired permanently, may be asked on occasion to drive company vehicle.

         

      REQUIREMENTS:

      • Must have Lead HVAC Service Technician experience 
      • 5-10 years of experience required
      • Must be able to train the crew in residential maintenance and repair
      • AC certification required
      • Knowledge of residential gas, oil, and heat pumps
      • Knowledge of proper residential change out
      • Knowledge of split systems
      • Must have driver's license and reasonably clean driving record

       

       EOE  M/F

       

       

       



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      QA INSPECTOR (Visual Inspection)

      3 TEMP-HIRE POSITIONS (after 90 days)

      INDUSTRY: MANUFACTURING

      LOCATION: TOAN0 (Greater Williamsburg Area)

      1st SHIFT: 6am-2pm

      2nd SHIFT: 2pm-10pm

      3rd SHIFT: 10pm-6am

      PAY RANGE: $9 - 9.50, depending on shift

       

      SUMMARY:

      Use gages to inspect product. Work in a fast-paced setting, inspecting 6000+ parts per shift.

       

      REQUIREMENTS:

      •    Must have prior manufacturing / assembly experience
      •    Able to work in very fast-paced environment
      •    Must be able to pass mechanical aptitude test
      •    Able to pass background check

       

       

       



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      SPRAY PAINTER: ASSEMBLY LINE

      A TEMP-HIRE POSITION (after 90 days)

      INDUSTRY: MANUFACTURING

      LOCATION: NEWPORT NEWS

      PAY RATE: $11 per hour

      1st Shift: 6am-2pm

       

      REQUIREMENTS:

      • Prior manufacturing experience required 
      • Ability to produce the maximum number of parts in minimum time by working efficiently.
      • ExperienceiInspecting for quality during production.
      • Must follow company procedures and safety rules.  

       

      EOE M/F


       



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      SHIPPING & RECEIVING: Heavy Lifting

      A TEMP-HIRE POSITION, after 90 days

      INDUSTRY: MANUFACTURING

      LOCATION: TOANO (Greater Williamsburg Area)

      PAY RATE: $10-11 per hour

      2nd Shift: 2pm-10pm Mon-Fri

       

      REQUIREMENTS:

      • Must have Shipping & Receiving experience and experience lifting up to 75lbs.
      • Must be able to pass background check

       

      EOE  M/F



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      CNC MACHINISTS

      2 TEMP-HIRE POSITIONS (after 90 days)

      INDUSTRY:  MANUFACTURING 

      LOCATION: NEWPORT NEWS

      PAY RANGE: $23-30 per Hour 

       

       REQUIREMENTS:

      • Minimum 5 years of CNC experience
      • Ability to both write and edit programs
      • Must have experience and working knowledge of CAM software
      • Able to read and understand blueprints/drawings

      Preferred:

      • Experience with horizontal and vertical mills
      • Experience with MasterCAM software and FANUC controls

       

      EOE M/F

       



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      WELDER / FITTER

      A TEMP-HIRE POSITION

      INDUSTRY: WELD SHOP 

      LOCATION: CHESAPEAKE

      First Shift, but must be flexible to work second shift also 

       

      BRIEF SUMMARY:

      A Combination Welder Level 1 position available to candidates able to use welding processes to join, fabricate and repair metal parts to close tolerances using layout techniques and blueprints.

       

      REQUIREMENTS: 

      • Must be able to read blueprints and MIG weld
      • 3+ years of experience in a Shop or Manufacturing setting 
      • Knowledge of welding symbols

       

      EOE  M/F 



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      CNC LASER SET UP OPERATORS

      2 TEMP-HIRE POSITIONS

      INDUSTRY: MANUFACTURING

      LOCATION: NEWPORT NEWS

      1st Shift Position: 7am-3:30pm and

      2nd Shift Position: 3:30pm - 12am.          

      PAY RANGE: $10-12 per hour for Trainee, $14-18 per hour for Experienced Operators, or higher for 5+ years' experience 

       

       REQUIREMENTS:

      • Able to produce sheet metal parts by setting up and operating computer numerical (CNC) Laser.
      • Must able to set up and operate CNC Laser to cut light gauge sheet metal.
      • Minimum 3-5 years of experience required
      • Understand machine set up including program retrieval, proper gases, proper nozzles, lenses cleaning and adjustments, etc.
      • Understand startup and shut down for laser machines
      • Must be able to understand metal fabrication concepts and processes
      • Ability to edit G code
      • Able to use precision tools
      • Check accuracy of work using blueprint and measuring tool
      • Work from blueprints, rough sketches, and customer samples
      • Locate and move raw material with pallet jack or forklift
      • Separate cut parts from scrap
      • Work well with Engineering
      • Follow safety rules and maintain a clean working environment

       

      EOE M/F

       




      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      ASSEMBLY / POWDER COATING LINE WORKERS

      A TEMP-HIRE POSITION (after 90 days)

      INDUSTRY: MANUFACTURING

      LOCATION: NEWPORT NEWS

      PAY RATE: $9.50 - $11 per hour

      2nd Shift: 3pm - 11pm, Mon-Fri (overtime required) 

       

      DUTIES:

      • Load and Unload Powder Coating Conveyor Line of sheet metal fabricated parts .
      • Assemble parts using hand tools
      • Package finished parts.
      • Produce the maximum number of parts in minimum time by working efficiently.
      • Inspect for quality during production.
      • Follow company procedures and safety rules.  

       

      REQUIREMENTS:

      • Prior experience in assembly, powder coating line, production work, manufacturing machine operation, or sheet metal work is preferred. 
      • The ability to read a basic blueprint is helpful but not required.
      • Able to lift up to 50 lbs;
      • Good basic math skills (addition, subtraction, division, multiplication
      • Strong mechanical skills
      • Able to work in cold or hot temperatures in plant.

       

      EOE M/F


       



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      TECHNICAL WRITER, SHIP REPAIR

      A TEMP-HIRE POSITION after 90 Days

      INDUSTRY: SHIP REPAIR

      LOCATION: VIRGINIA BEACH

      PAY RANGE: $16-20 per hour

       

      REQUIREMENTS:

      • Bachelor's degree in English or other liberal arts major OR 4+ years of technical writing experience.
      • Technical writing experience in the marine repair or engineering industry is desired
      • Experience in proposal and/or resume writing is desired
      • MS Office Word, PowerPoint, Outlook and Excel proficiency.
      • Experience with graphic programs such as MSVisio and/or Adobe Illustrator is a plus.
      • Strong written and verbal communication skills
      • Ability to interview subject matter experts to obtain technical information for development of proposals and resumes

      EOE  M/F 

       



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      CNC PROGRAMMER

      A TEMP-HIRE POSITION

      INDUSTRY: AEROSPACE

      LOCATION: NEWPORT NEWS, VIRGINIA
       

      SUMMARY: 

      • Must be very experienced with CNC machining requirements.
      • 3 years minimum programming required
      • Must be proficient in PRO E / CREO and or MasterCAM programming software (minimum 3 years)
      • Must have background in Machining
      • Able to work from blueprints

       

      EOE M/F

       



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      MARKET RESEARCH ANALYST

      A DIRECT-HIRE POSITION with Excellent Benefits

      INDUSTRY: MANUFACTURING

      LOCATION: NORFOLK, VA

      SALARY RANGE: $56K - $65K

       

      SUMMARY:

      Will conduct Marketing research and compile studies and reports regarding industry and market trends, competitors, and potential and existing customers. Create written reports and presentations to be given at workshops and meetings. Record captured market data. Report on gained market information, market penetration, and identify new opportunities. Study marketing metrics and analyze causal relationship. Conduct customer surveys. Understand brand perception and position. Gather information on competitors. Look at financial outcomes to enhance profitability. Study market trends, past present, and future. View demographics, methods of distribution, and marketing venues. Develop strategies that focus on sales.

        

      REQUIREMENTS:

      • Bachelor's degree in Business, Marketing, Statistics, or technical field such as Mechanical or Electrical Engineering and 4 years of related experience OR equivalent combination of education and experience
      • Excellent use of the English language, incl. grammar, syntax, and rules of composition
      • Business and statistical principles applied to business development, marketing, and sales
      • Familiarity with micro and macro economics
      • Familiarity with advanced statistical analysis and research methods
      • Excellent use of MS Office
      • Strong verbal and written communication skills
      • Ability to generate and deliver presentations
      • Ability to travel within the US and abroad up to 15% of the time
      • Ability to obtain valid driver's license and passport

       

      EOE M/F 

       

       

       

       

       

       



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      DELIVERY DRIVER / SHOP HELPER

      A TEMP-HIRE POSITION

      INDUSTRY: MACHINE SHOP 

      LOCATION: CHESAPEAKE

      PAY RATE: $10 - $12 per Hour

       7am - 3:30pm

       

      SUMMARY:

      Deliver manufactured parts to customers. Loading and unloading the truck with fabricated machine parts. Responsible for driving a regular box truck and a short flatbed truck (no CDL required). Will also operate forklift. Responsible for cutting stock material (metal) and organizing material. Responsible for general shop cleaning, power washing. 

       

       REQUIREMENTS:

      • Virginia driver's license required
      • Good driving record
      • Experience driving a small truck and forklift
      • Mechanical skills required for sawing materials
      • Able to read a tape measure
      • Able to lift 50 - 60 lbs.
      • Able to load and unload truck
      • Must be presentable in order to deliver parts to customers
      • Ability to pass criminal background check

      EOE  M/F

       



        To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

        Recruiter: Heidi Elam       
        eMail a friend about this job

        MANUFACTURING ENGINEER: EXTRUSION PROCESS

        A DIRECT-HIRE POSITION with Excellent Benefits

        LOCATION: HAMPTON

        SALARY: $85K or higher

         

        SUMMARY:

        Will be responsible for the manufacturing processes and testing related to flouropolymer extrusions. Provide technical guidance and hands-on expertise to ensure optimal performance. Implement and apply lean principles and techniques utilizing Lean and Six Sigma tools to improve the process and keep cost at a minimum. 

         

        REQUIREMENTS:

        • B.S. degree in Mechanical Engineering, Chemical Science, or Manufacturing Engineering
        • 5-7 years of related experience. Must have experience as Manufacturing Engineer.
        • Lean Manufacturing certification a plus
        • Must have plastics industry experience related to high precision extrusion and processing, preferably with fluoropolymers.
        • Experience in one of the following: thermoplastic polymers, film lamination and surface coating.
        • Knowledge of equipment for film extrusions, stretching/orientation equipment, cable braiders and metalizers.
        • Experience with dimensional inspections and related equipment.
        • Knowledge of data acquisition and control systems.
        • Ability to troubleshoot and analyze manufacturing processes and production equipment
        • Lean Manufacturing Practices & Methodologies (Kaizen, 5S, Value Stream Mapping).
        • Knowledge of algebra, trigonometry, calculus and statistics
        • Knowledge of MRP, CAD, IMPACT and process control software
        • Must be US citizen

         

        EOE  M/F 

         

         

         

         

         

         

         

         

         

         



        To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

        Recruiter: Heidi Elam       
        eMail a friend about this job

        CNC MACHINISTS

        2 TEMP-HIRE POSITIONS (after 90 days)

        INDUSTRY: AEROSPACE MANUFACTURER 

        LOCATION: NEWPORT NEWS

         

         REQUIREMENTS:

        • 10+ years of machining experience
        • Experience with complex set-ups using 3-5 axis CNC mills, lathes and vertical turning lathes
        • Able to calculate and set up controls for regulation of speeds and feeds
        • Must be able to read blueprints and use applied math
        • Able to operate conventional machines as needed
        • Available to work flexible schedule and overtime as needed
        • Must be able to pass criminal background check

        Preferred:

        • High tolerance prototype component experience
        • Ability to run multiple machines simultaneously 

         

        EOE M/F

         



        To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

        Recruiter: Heidi Elam       
        eMail a friend about this job

        SHEETMETAL MECHANIC with Active Secret Clearance

        A CONTRACT POSITION

        INDUSTRY: SHIP REPAIR

        LOCATION: NORFOLK, VA 

        PAY RATE: $26 per hour  

         

        SUMMARY: 

        Seeking sheetmetal mechanics in Hampton Roads with experience in installation of foundations, bulkheads, furniture, and other associated sheetmetal work. Seeking local candidate only.

      • REQUIREMENTS:

      • Minimum 4 years as a First Class Sheetmetal Mechanic
      • Must have own tools
      • Ability to comprehend blueprints, diagrams, and sketches
      • Ability to pass criminal background check
      • Ability to pass a hair follicle drug screening
      • Will be OSHA 10 trained
      •  

        EOE M/F 


        Must-have Qualifications:



        US Citizenship required.

        To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

        Recruiter: Heidi Elam       
        eMail a friend about this job

        PIPE WELDERS

        8 CONTRACT POSITIONS

        INDUSTRY: SHIP REPAIR

        LOCATION: NORFOLK  

         

        SUMMARY: 

        Seeking pipe welders with experience in shipyard pipe welding.

         

        REQUIREMENTS: 

        • Ability to read blueprints
        • Ability to pass criminal background check
        • Ability to pass drug screening

        EOE  M/F


        Must-have Qualifications:

           


            US Citizenship required.

            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            COMMERCIAL ELECTRICIAN

            A TEMP-HIRE POSITION

            INDUSTRY: MANUFACTURING

            LOCATION: HAMPTON

            PAY RANGE: $22 - $27 per Hour 

             

            SUMMARY:

            Seeking a Commercial Electrician who will be based in Hampton, but work at sites throughout Hampton Roads.

             

            REQUIREMENTS

            • Must have minimum 6 years of Commercial Electrician experience
            • Must have experience with EMT conduit
            • Experience with wiring
            • Experience with schematics
            • Must have some own tools

             

              EOE  M/F 



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            MANUAL INSIDE MACHINIST SUPERVISOR, 2nd Shift

            TEMP-HIRE after 90 Days

            INDUSTRY: MANUFACTURING

            LOCATION: CHESAPEAKE

            PAY RATE: $26 per Hour 


             

            SUMMARY:

            Create parts and make repairs according to instructions and/or drawings. Operate all machine shop equipment. Operate overhead cranes and perform rigging. Perform incoming and outgoing inspections. Fill out all paperwork as necessary.

             

            REQUIREMENTS:

            • Minimum 5 years of experience operating milling machines, lathes, boring mills, and grinders
            • Able to work with extremely close tolerances (i.e. .0005" - .001")
            • Ability to read blueprints
            • Own tools required
            • Must be willing to work overtime
            • Pass background check

            EOE     M/F

             



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            COMPOSITE TECHNICIANS

            3 CONTRACT POSITIONS

            INDUSTRY: AEROSPACE

            LOCATION: NEWPORT NEWS

             

            SUMMARY: 

            Under direct guidance of higher grade employees to perform duties involving construction and installation of model parts.  Oral and/or written instructions from Technician B or above. 

            • Assist in set ups and layouts.

            • Assist in laminating and trimming operations.

            • Prepare materials for construction.

            • Related duties as assigned.

            • Use all hand tools.

            • Painting and decaling per instructions.

            • Daily/special housekeeping duties.

            • Implement all safety policy and hazardous waste communications.

             

             REQUIREMENTS: 

            • High school graduate or equivalent

            • Must have some experience working as a Composite Technician

            • Good physical condition (ability to lift 50 lbs.)

            • good math skills

            • Experience using basic hand tools 

             

            EOE M/F



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            2 TEMP-HIRE POSITIONS

            Second Shift: 3pm-11pm

            Third Shift:    11pm - 7:30am

            INDUSTRY: MANUFACTURING

            LOCATION: NEWPORT NEWS (DENBIGH)

            PAY RATE: $12.50 per hour (Can be increased to $13.50 or $14 when hired permanently after 90 days)


            REQUIREMENTS:
            --Must have Forklift and Crown Lift (Reach Truck) experience
            --Must be willing to work overtime

            --Must have stable work history 

            --Must be willing to work any shift 

            --Warehouse experience required
            --Must be willing to work overtime
            --Willing to work in a freezer environment: Freezer gear will be provided.
            --Must have reasonably clean background

             

            EOE M/F 



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            CLEANING TECHNICIANS

            2 TEMP-HIRE POSITIONS

            INDUSTRY: WATER & FIRE DAMAGE RESTORATION  

            LOCATION: WILLIAMSBURG


             

            SUMMARY:

            Will pack and clean homes after disasters, restoring water and fire damage.

             

            REQUIREMENTS:

            • Must be able to perform general labor every day, sometimes in extreme conditions such as sewage, mold, fire, floods, etc.
            • Restoration Industry experience preferred

             

             

            EOE M/F 

             

              



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            JANITOR: MANUFACTURING FACILITY, Immediate Need

            A TEMP-HIRE POSITION, Full-Time or Part-Time


            LOCATION: NEWPORT NEWS


            SHIFT: 7am-3:30pm, Mon-Fri

            PAY RATE: $9 - $10 per hour

             

            REQUIREMENTS: 

            • Must be able to do light industrial and office cleaning and light maintenance
            • Able to lift 50lbs
            • Maintain waxed floors
            • Clean factory floor
            • Trained to use scissor lift to clean 20 ft. ceiling  

            EOE
             


             


             

             



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            SOFTWARE DEVELOPER

            A DIRECT-HIRE POSITION with Excellent Benefits

            INDUSTRY: MANUFACTURING

            LOCATION: NEWPORT NEWS, VA

            SALARY RANGE: $70K - $95K 

             

            SUMMARY:

            Will assist in developing and writing software for components and systems designed for heavy underground equipment. This position will support Autonomy Development.

             

            REQUIREMENTS:

            • B.S. degree in Electrical Engineering or Computer Engineering and 2 years of experience in an engineering environment
            • Previous experience with autonomous vehicles / automated vehicle design highly desired
            • Knowledge of software programming tools, e.g. CoDeSys, C++.
            • Knowledge of communication protocols such as RS232, CanOpen, J1939
            • Experience utilizing algebra, probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry
            • Experience applying fractions, percentages, ratios, and proportions to practical situations
            • Able to travel within the US and abroad 20% of the time

             

              EOE  M/F 



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            SOFTWARE DEVELOPER, 2-3

            A DIRECT-HIRE POSITION with Excellent Benefits

            INDUSTRY: MANUFACTURING

            LOCATION: NEWPORT NEWS, VA

            SALARY RANGE: $80K - $110K 

            Relocation Assistance Available 

             

            SUMMARY:

            Will assist in developing and writing software for components and systems designed for heavy underground equipment. This position will support Autonomy Development in an R&D environment.

             

            REQUIREMENTS:

            • B.S. degree in Electrical Engineering or Computer Engineering or Master's degree
            • Minimum 4 years of experience in an engineering environment
            • Previous experience with automated vehicle design highly desired
            • Knowledge of software programming tools, e.g. C++, CoDeSys, etc.
            • Knowledge of communication protocols such as RS232, CanOpen, J1939
            • Experience utilizing algebra, probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry
            • Experience applying fractions, percentages, ratios, and proportions to practical situations
            • Able to travel within the US and abroad 20% of the time

             

              EOE  M/F 



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            SOFTWARE QUALITY ENGINEER, SR.

            A DIRECT-HIRE POSITION with Excellent Benefits

            INDUSTRY: MANUFACTURING

            LOCATION: NEWPORT NEWS, VA

            SALARY RANGE: $88K - $110K 

             

            SUMMARY:

            Will implement quality engineering and control tools and processes for systems used in large underground equipment.

             

            REQUIREMENTS:

            • B.S. degree in Computer Engineering or Computer Science
            • 8 years of programming experience in an engineering environment (will consider outstanding candidates with less than 8 years)
            • Knowledge of software languages, e.g. Java, C/C++, etc.
            • Knowledge of scripting languages, e.g. Python, Bash, etc.
            • Automatic code generation tools, e.g. Matlab/Simulink
            • Testing and software validation techniques 
            • Application lifecycle management tools, e.g. DOORS, PTC Integrity, TFS
            • Source control systems (Git, Subversion)
            • Integration server technology
            • Software configuration management tools
            • Able to create software configuration management processes and workflow
            • Knowledge of basic networking and wireless networks
            • Knowledge of software development standards
            • Cybersecurity standards
            • Able to write specs for software functions
            • Agile and Waterfall software development lifecycles
            • V-model methodology

            EOE M/F

             

             

             

             

             

              EOE  M/F 



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            PRODUCTION PLANNER: STRUCTURAL STEEL MANUFACTURING

            A DIRECT-HIRE POSITIONS with Excellent Benefits

            INDUSTRY: MANUFACTURING

            LOCATION: NEWPORT NEWS

            PAY RANGE: $55K - $75K

            Generous Relocation Assistance is Available. 

             

            SUMMARY

            Plan, prepare, and issue production schedules for Structural Steel, Heavy Steel manufacturing processes through fabrication, incl. welding. Create master schedule for sequence of each operation to meet shipping dates according to customer orders. Schedule workflow for each department and manufacturing operation. Plan fabrication, paint and assembly sequence to ensure timely completion of production orders. Utilize Logistics and Warehouse software and ERP system and train end users. Utilize nesting software. Read and interpret engineering drawings. Ascertain availability of parts and correct shortages. Assist with managing inventory for fabrication and assembly. Initiate Engineering Change Requests and update Bills of Material. Participate in continuous improvement projects.

             

            REQUIREMENTS:

            • B.S. degree and 4 years of related work experience
            • Must have strong Heavy Steel Fabrication experience. Manufacturing Engineer/Planner background
            • Will also consider a Manufacturing Engineer with supply chain concentration, heavy steel/welding, and SAP background
            • Ability to read blueprints
            • Knowledge of weld symbols and bevels.
            • Nesting software required
            • AutoCAD experience or similar
            • Knowledge of inventory software and order processing systems
            • Knowledge of Project Management software, MS Word and Excel spreadsheets
            • Math skills: percentages, circumference, and volume. Knowledge of basic algebra and geometry.
            • Strong oral and written communication skills
            • Knowledge of manufacturing processes such as planning, bill of material, shop floor monitoring, and costing.
            • Experience Enterprise Resource Planning (ERP), Engineering Data Management (EDM), and Warehouse Management System (WMS) a plus
            • AIPICS CPIM certification preferred but not required
            • Up to 10% overnight travel, domestic and international
            • Must be able to obtain valid driver's license and passport
            • Clean background
            • Ability to pass drug test

             

            EOE  M/F 

             



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            SYSTEMS DEVELOPMENT ENGINEER, Sr.

            A DIRECT-HIRE POSITION with Excellent Benefits

            INDUSTRY: MANUFACTURING

            LOCATION: NEWPORT NEWS, VA

            SALARY RANGE: $80K - $110K 

            Relocation Assistance Available 

             

            SUMMARY:

            Will research, develop, design, and validate hardware, software, and other components for systems used in large underground equipment. Focus is on automated vehicle design in an R&D environment. 

             

            REQUIREMENTS:

            • B.S. degree in Electrical Engineering, Computer Science, or Computer Engineering
            • Minimum 6 years of Systems Engineering and / or software experience in an engineering environment
            • Software programming tools, e.g. Linus, CoDeSys, C++. etc.
            • Communication protocols, e.g. RS232, CanOpen, J1939, etc.
            • Wireless telemetry such as used in surface mining industry
            • Hardware and computing platforms
            • System modeling techniques and software, e.g. Matlab, Simulink
            • Experience with diagnostic tools to verify software function and stability
            • Project Management tools, e.g. MS Project
            • Experience writing specs for software function 

            EOE M/F

             

             

             

             

             



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            MECHANICAL MAINTENANCE ENGINEERS

            3 DIRECT-HIRE POSITIONS with Excellent Benefits

            INDUSTRY: MANUFACTURING

            LOCATION:  MOBILE, AL

            SALARY RANGE: $75K - $100K 

             

            SUMMARY:
            Analyzes reasons for production problems in cooperation with other maintenance and production personnel.Troubleshoots unscheduled maintenance issues. Researches, Develops, and Coordinates Work Orders through completion. 

             

            REQUIREMENTS: 

            • Bachelor of Science Degree in Mechanical Engineering, or equivalent combination of education and  experience        
            • Demonstrated knowledge of Mechanical Engineering practices
            • Maintenance Knowledge of heavy industrial equipment
            • Technical knowledge of Rotational equipment, mechanical power transmission, drive shafts, bearings, couplings
            • Hydraulic systems, cylinders, servo valves, piping, hose connections, filtration, etc.
            • Lubrication systems; centralized oil and grease systems, lubrication practices, etc.
            • Demonstrated knowledge of Reliability Centered Maintenance (RCM) Practices
              Knowledge of Predictive Maintenance techniques and analysis
            • Excellent Communication skills
            • High level of organizational skills
            • Technical Writing skills
            • Mechanical/Electrical aptitude
            • AutoCAD
            • Microsoft Office skills

             

            EOE  M/F 

             

             

              



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            ELECTRICAL MAINTENANCE ENGINEER

            A DIRECT-HIRE POSITION with Excellent Benefits

            INDUSTRY: MANUFACTURING

            LOCATION:  MOBILE, AL

            SALARY RANGE: $75K - $100K 

             

            SUMMARY: 

            Analyzes Galvanize Coating line data with PDA software to identify equipment failures.Troubleshoots automation process with P80i (GE software) and S7(Siemens software) to reduce delays and increase MTBF. Analyzes production process for continuously optimization of the process automation with P80i (GE software) and S7 (Siemens software). Responsible for creating work orders and ordering spare parts using SAP software.

             

            REQUIREMENTS:

            • B.S. degree in Electrical Engineering, Industrial Electricity or related field, or equivalent combination of education and experience        
            • Experience with Power feeding, Motor Control Centers, and Medium /Low Voltage distribution system
            • Industrial process automation systems
            • PLC Process Sequences
            • GE P80i, Siemens S7, Siemens Portal, and Human Machine Interface
            • Motors and Variable Frequency Drives
            • Regulation of Variable Frequency Drive with PLC systems
            • LAN systems, Profibus Communication, and Canbus Communication
            • Microsoft Word, Excel, Office, and Project
            • Industrial safety systems            
            • Knowledge of cascade regulation system
            • Knowledge of atmosphere control
            • Strong time management and priority management skills
            • Knowledge of Hot Dip Galvanizing Lines
            • Knowledge of inline Skin Pass Mill
            • Knowledge of strip tension measurement and control devices
            • Knowledge of Drever Furnace and temperature  control
            • Knowledge of Inductotherm VIP and Zinc Pot Inductors

             

            EOE M/F 



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            HRIS ANALYST

            A DIRECT-HIRE POSITION with Excellent Benefits

            INDUSTRY: MANUFACTURING

            LOCATION:  MOBILE, AL

            SALARY RANGE: $80K - $90K 

             

            SUMMARY:
            Provide support for existing HR technology including SAP HRIS; recommend and assist with implementing improvements to HR technologies. Lead the team in the sourcing, development and implementation of new HR technology for the HR department, including design and documentation of HR business processes and systems; in partnership with the IT department. Drive continuous improvement of HR process execution to be efficient, effective and timely; identify new KPIs and monitor existing KPIs to ensure the design, development and implementation of HR process and technology improvement initiatives will achieve desired business results. Develop and maintain relationships with internal/external vendors of HR technology; actively network and participate in benchmarking and best practice development. Provide subject matter expertise and develop recommendations for continuous improvement.

             

            REQUIREMENTS:

            • B.S. degree in Human Resources, Management Information Systems, or other relevant discipline 
            • 5 years of progressively responsible HRIS experience
            • Experience with SAP including SuccessFactors preferred
            • Working knowledge in applicable HR processes is required
            • Knowledge of SAP and SuccessFactors is preferred
            • Working knowledge of the relationships between all HR processes and other business units/departments required
            • Advanced knowledge and understanding of Human Resources strategy which includes HR Information Systems, HR tools, technologies, processes, and systems is required
            • Knowledge of organizational systems framework

             

            EOE  M/F 

             

             

             

             

             

              



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            QUALITY CONTROL ENGINEER

            A DIRECT-HIRE POSITION with Excellent Benefits

            INDUSTRY: MANUFACTURING

            LOCATION:  MOBILE, AL

            SALARY RANGE: $75K - $100K 


            SUMMARY:

            Create and implement Quality and Inspection training and conduct it on a regular basis. Design, develop, and improve coil inspection and testing procedures.

             

            REQUIREMENTS:        

            • B.S. degree in Metallurgy, Materials Science, Industrial, or Chemical Engineering, or equivalent combination of education and experience
            • 5+ years of experience in steel production or quality related field preferred
            • Knowledge of product defects and effects on final product
            • Knowledge of customer processes including forming and stamping
            • Strong knowledge of quality systems and processes     
            • Strong computer skills
            • Training / presentation skills
            • Basic understanding of upstream steelmaking processes
            • Software proficiency with SQL (or other query formats), statistical tools, and data analysis
            • Practical experience working in steel production
            • Basic knowledge of Automotive products and quality standards

             

            EOE M/F

             

             

             

             

             

             

             

             

              



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            SAP (HCM) SPECIALIST

            A DIRECT-HIRE POSITION with Excellent Benefits

            INDUSTRY: MANUFACTURING

            LOCATION:  MOBILE, AL

            SALARY RANGE: $100K - $105K 

             

            SUMMARY:
            Diagnoses problems and develops and implements solutions in SAP HCM, SAP SuccessFactorsTalent Management, and integration to Mawa Time Clock System and Ceridian Payroll. Understand relevant business processes so that they can be modeled in internal system. Perform highly complex and demanding tasks dealing with the SDLC process which consists of the analysis, design, development, and testing of solutions serving business line and functional units; and its relationship to SAP SolMan.
                

            REQUIREMENTS:

            • B.S. degree in Information Technology, or Computer Science or equivalent combination of education and work-related experience
            • 5+ years of experience in SAP configuration and/or implementation
            • Detailed understanding in one of the following SAP component Area SAP HCM and SAP SuccessFactors Talent Management
            • Understanding of Agile Methodology is a plus
            • Experience with SAP HANA, SAP BOBJ, and WorkSoft is a plus
            • Familiarity with ECC architecture
            • Knowledge of SAP maintenance tools  
            • At least one full lifecycle implementation of SAP
            • Knowledge of manufacturing processes in a Steel producer/processor industry or similar manufacturing environment
            • Project management skills (project plan development and tracking, issue resolution, risk mitigation, metrics development and tracking)Outstanding writing and documentation skills
            • Proficiency in MS Office products
            • Excellent analytical, mathematical and creative problem solving skills
               


             EOE M/F

             

             

              



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            SILK SCREENER

            A TEMP-HIRE POSITION after 90 Days

            LOCATION: NEWPORT NEWS, VA

            PAY RATE: $11-12 per hour

             

             EOE  M/F



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            AUTOMATED MANUFACTURING TECHNICIANS

            4  TEMP-HIRE POSITIONS

            INDUSTRY: MANUFACTURING

            LOCATION: TOANO (Greater Williamsburg Area)

            PAY RANGES: 

            1st Shift: 61m-2pm, rotating shift, must be avail. Monday-Sunday      $11.50/hour

            3rd Shift: 10pm-6am, rotating shift, must be avail. Monday-Sunday       $11.75/hour

            Able to work overtime 

             

            SUMMARY:

             
            Seeking Manufacturing Technicians in Toano that are able to work well with small materials and have good attention to detail. 

             

            REQUIREMENTS: 

            • Prior experience working in a manufacturing setting
            • Ability to lift 75lbs repeatedly
            • Reliable transportation
            • Must take a mechanical aptitude test
            • Pass criminal background check
            • Pass drug screening 

             

            EOE M/F 

             



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            MACHINE OPERATORS: MANUFACTURING

            2 TEMP-HIRE POSITIONS (after 90 days)

            INDUSTRY: MANUFACTURING

            LOCATION: WILLIAMSBURG

            PAY RANGE: $9.25 - $10.25

            First Shift:           6am-2:30pm

            Second Shift:      2pm - 10:30pm

            Third Shift:           10:30pm-6:30am  

             

            SUMMARY:

             

            Load and unload lapping machines, maintain cleanliness of machines and tooling, perform minor calculations and basic data entry. Skilled position with a lot to learn.

            REQUIREMENTS: 

            • Prior Manufacturing experience
            • Experience as Machine Operator  
            • QA Inspection experience
            • Attention to detail is a must
            • Willingness and ability to learn

            EOE M/F

             


            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            HAUL TRUCK OPERATOR

            A CONTRACT POSITION from January - July, 2018

            INDUSTRY: CONSTRUCTION

            LOCATION: EMPORIA

            PAY RATE: $20-$29 per hour

            Flexible schedule: sometimes 40 hours/ week, sometimes no hours, depending on availability of the truck. 

             

            BRIEF DESCRIPTION:

            Seeking Haul Truck Operator who will operate and test drive 240t haul truck. Fill and operate 65t water truck on the site to control dust during testing. During rainy conditions or during times of hauling inactivity, will assist the testing group with organizing and cleaning of the grounds site.

             

            REQUIREMENTS:

            • High school diploma or equivalent, technical school or relevant apprenticeship and 3 years as Heavy Industrial Equipment Operator experience
            • Ability to safely operate and drive heavy haul truck to transport tons of materials for short distances in a surface environment
            • Must have and maintain valid driver license and safe driving record
            • Must have reliable transportation
            • Must be able to pass drug screen

             

            EOE M/F

             



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            PURCHASING ASSISTANT / PRODUCTION CONTROL

            A TEMP-HIRE POSITION

            INDUSTRY: ELECTRONICS MANUFACTURING 

            LOCATION: HAMPTON

             

            SUMMARY:

            Perform administrative tasks in the production control function and also provide clerical support to Materials Management department. Will act as backup for Stockroom, Receiving, Shipping and Purchasing departments.

             

            REQUIREMENTS: 

            • High School degree, GED or equivalent
            • 2 years of work-related experience or course work in Purchasing or Material Management
            • Good keyboarding and 10-key by touch skills
            • MS Word and Excel proficiency
            • Dynamics AX a plus
            • Able to lift 25-30lbs

             

             

             



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            CNC LASER OPERATOR

            A TEMP-HIRE POSITION

            INDUSTRY: MACHINE SHOP

            LOCATION: CHESAPEAKE

             

            SUMMARY:

            Will be operating a CNC Laser Cutter. 

            REQUIREMENTS:

            1-3 years of experience operating a CNC laser machine and  working with different metals.

             

            EOE  M/F 

             



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            MAINTENANCE TECHNICIAN: AUTOMATION

            A DIRECT-HIRE POSITION with Excellent Benefits

            INDUSTRY: MANUFACTURING

            LOCATION: VIRGINIA BEACH, VA



            SUMMARY: 

            Ensure proper functioning of mechanical equipment through regular maintenance and troubleshooting of hydraulic and pneumatic assemblies such as valves, pumps, cylinders, ball bearings, etc.. Ensure proper functioning of robots.

             

            REQUIREMENTS:

            • Minimum 3 years work-related experience on automated production equipment
            • Journeyman License a plus
            • Ability to read blueprints and schematics to determine method or assembly of parts or machine
            • Ability to perform tool changes
            • Ability to read metric and use measuring tools
            • Must have strong hands-on problem solving skills
            • Able to train operators and work well in a team

             

             EOE M/F 



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            CONVENTIONAL MACHINISTS

            2 TEMP-HIRE POSITIONS, after 90 Days

            INDUSTRY: MACHINE SHOP

            LOCATION: PORTSMOUTH, VIRGINIA


             

            REQUIREMENTS:

            • Minimum 3 years of experience operating manual lathe and mill
            • Experience working with large parts
            • Ability to read blueprints
            • Own tools
            • Must pass background check

             

            EOE   M/F



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            AUTOMATION ENGINEER: CRANES

            A DIRECT-HIRE POSITION with Excellent Benefits

            INDUSTRY: MANUFACTURING

            LOCATION:  MOBILE, AL

            SALARY RANGE: $75K - $100K 


             SUMMARY:

            We are seeking an Automation Engineer who will program PLC drives and robotics in Company's efforts of automating all their cranes.

             

             REQUIREMENTS:

            • Bachelor's degree in Information Technology, Computer Science, and/or Engineering or equivalent combination of education and experience
            • 1-5 years of working with programming, robotics, and automation related experience
            • Experience with C++ or .NET Framework, MS SQL Server or Oracle DB, Visual Studio, Windows Server required
            • Communication Socket programming knowledge a plus
            • Understanding of object-oriented programming (OOP) and computer science foundations
            • Experience with equipment / process automation applications in a manufacturing environment a plus
            • Experience with material  handling equipment, especially cranes and conveyor systems a plus
            • Knowledge of OSHA and ASME codes and standards
            • Knowledge with warehouse management systems (WMS) a plus
            • Familiarity with equipment drives, PLC's, Profibus, Profinet, Profisafe, HMI (programming)
            • Cloud-based solutions for data storage retrieval preferred

             

            EOE M/F

             

             

             

             

             

             

             

             

              



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            SAP ABAP CONSULTANT

            A DIRECT-HIRE POSITION with Excellent Benefits

            INDUSTRY: MANUFACTURING

            LOCATION:  MOBILE, AL

            SALARY RANGE: $100K - $105K 

             

            SUMMARY:

            This is the role of an SAP Technical Specialist who will develop, test, implement, debug, maintain and document ABAP (Advanced Business Application Programming).  

             

             REQUIREMENTS:

            • Bachelor's degree in Management Information Systems, Computer Science, or equivalent combination of education and experience
            • 5+ years of systems experience in ABAP and/or SAP PP module
            • Thorough understanding of ABAP, knowledge of ABAP objects, BADI's, BAPI's, function modules, function groups, etc.
            • Knowledge of SAP ALE and IDOCs, Smartforms, ant data dictionary
            • Detailed understanding of the SAP MM/PP component areas with integration to other modules like CO and SD
            • Project management skills
            • Knowledge and understanding of manufacturing processes
            • Full lifecycle implementation of SAP
            • Knowledge of HANA and integration tools like SAP PI would be a plus
            • Excellent written communication skills

             

            EOE M/F

             

             

             

             

             

             

             

             

              



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            SHIP REPAIR WORKERS    w. Active Secret Clearance

            32 CONTRACT POSITIONS

            LOCATION: PORTSMOUTH, NEW HAMPSHIRE

             

            CTR is currently recruiting for Ship Repair Workers with Active Secret Clearance. Starts October 1

            • 2   Red Badge Marine Electricians
            • 5   Red Badge Painters or former Boatswains Mates
            • 10 Red Badge Temp Pipefitters
            • 10 Red Badge Outside Machinists
            • 5   Red Badge Riggers

            Former US Navy Personnel strongly encouraged to apply. We pay referral bonuses.

             

            EOE M/F 



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            VALVE TECHNICIANS 2 and 3

            2 TEMP-HIRE POSITIONS

            INDUSTRY: SHIPBUILDING

            LOCATION: NEWPORT NEWS

            PAY RATE: $18/HR

             

            SUMMARY:

            Will be responsible for the repair, overhaul, testing of valves (gate, globe, ball, etc.,), hydraulic components according to Navy / Coast Guard or commercial guidelines. Assembles, disassembles, repairs, and reassembles precision assemblies and corrects malfunctions. May assemble and modify prototype precision units for engineering personnel.

             

            REQUIREMENTS:

            • High School diploma. GED, or certification
            • 5 years of related experience
            • Previous mechanical experience with Navy / Coast Guard or commercial operations preferred
            • Must be able to understand drawings, technical documents.

             EOE  M/F



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            MANUAL INSIDE MACHINIST

            TEMP-HIRE after 90 Days

            INDUSTRY: MANUFACTURING

            LOCATION: CHESAPEAKE


             

            SUMMARY:

            Create parts and make repairs according to instructions and/or drawings. Operate all machine shop equipment. Operate overhead cranes and perform rigging. Perform incoming and outgoing inspections. Fill out all paperwork as necessary.

             

            REQUIREMENTS:

            • Minimum 5 years of experience operating milling machines, lathes, boring mills, and grinders
            • Able to work with extremely close tolerances (i.e. .0005" - .001")
            • Ability to read blueprints
            • Own tools required
            • Must be willing to work overtime
            • Pass background check

            EOE     M/F

             



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            X-RAY OPERATOR: INDUSTRIAL

            A TEMP-HIRE POSITION (after 90 days) 

            INDUSTRY: MANUFACTURING

            LOCATION: TOANO (Greater Williamsburg Area) 

            PAY RATE: $11.50 per hour 

            3rd Shift: 10pm-6am, Monday-Sunday, Extensive Overtime

             

            SUMMARY: 

            Seeking an X-ray Operator who has experience working within an industrial environment.

             

            REQUIREMENTS: 

            • High school diploma or trade certification
            • Strong mechanical aptitude
            • High attention to detail
            • Willingness to work overtime
            • Computer skills
            • Reliable transportation
            • Pass aptitude test
            • Clean background
            • Pass drug screening 

             

            EOE  M/F 


            Must-have Qualifications:





            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            ENGINEERING TECHNICIANS

            2 TEMP-HIRE POSITIONS (after 90 days)

            INDUSTRY: MANUFACTURING

            LOCATION: WILLIAMSBURG

            PAY RANGE: $16-24 per Hour

            Work Hours: 8am-5pm



            SUMMARY:

            Seeking Engineering Technicians with a background in mechanical abilities, machining, programming, electrical. Relevant experience can qualify in lieu of a degree. Mechatronics experience or coursework would be ideal.


            EOE  M/F



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            CONSTRUCTION MANAGER: Building Controls Experience

            A DIRECT-HIRE POSITION w. Excellent Benefits

            INDUSTRY: HEATING, COOLING & REFRIGERATION

            LOCATION: CHESAPEAKE, VA

            SALARY: $85K with up to 35% performance incentives

             

            SUMMARY:

            Seeking a Construction Manager to manage $10M plus in construction activity involving a team of field installers, mechanics, commissioning, programming, design, and project managers. Will coordinate, manage, and expand a successful construction business and will be a strategic member of the leadership team. Will work with customers throughout the Mid-Atlantic region. The company focuses on HVAC & Mechanical Systems, Direct Digital Controls, Fire & Security and complete Systems Integration

             

            REQUIREMENTS:

            • Minimum 4 years of experience as Project Manager on $1-2M projects and 2 years of experience as Construction Manager overseeing two or more project managers.
            • College education or an Associate's degree in a related field
            • HVAC knowledge is a plus but not required
            • Knowledge Building Automation Controls highly desirable
            • Certified Construction Manager (CCM), Associate Constructor (AC), or Certified Professional Constructor (CPC) a plus
            • MS Office proficiency, i.e. Outlook, Word, Excel, Project, and Visio
            • Experience with Vista (Viewpoint) construction accounting software a plus

              

            EOE M/F 



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            CONVENTIONAL MACHINIST

            TEMP-HIRE after 90 Days

            INDUSTRY: AEROSPACE

            LOCATION: NEWPORT NEWS


             

            SUMMARY:

            Set up and operate a variety of machine tools such as Lathes, Milling, Shapers, Planers, Precision Grinders to make parts, mechanisms, machines, to exacting tolerances. Interpret Blueprints, Sketches, Engineering Specifications.

             

            REQUIREMENTS:

            • Minimum 2 years of experience operating manual lathe and mill 
            • Minor CNC Machining experience
            • Ability to read blueprints
            • Own tools required

            EOE     M/F

             



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            RESTORATION TECHNICIANS

            2TEMP-HIRE POSITIONS

            INDUSTRY: WATER & FIRE DAMAGE RESTORATION  

            LOCATION: WILLIAMSBURG

            PAYA RATE: $9-12 per hour depending on experience and certifications 

             

             

            REQUIREMENTS:

            • Must be able to perform general labor every day, sometimes in extreme conditions such as sewage, mold, fire, floods, etc.
            • Restoration Industry experience preferred
            • IICRC Certification preferred 

             

            EOE M/F 

             

              



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            SYSTEMS ENGINEER 2: HIL

            A DIRECT-HIRE POSITION with Excellent Benefits

            INDUSTRY: MANUFACTURING

            LOCATION: NEWPORT NEWS, VA

            SALARY: up to $95K

            Relocation Assistance Offered 

             

            SUMMARY:

            Will research, design, develop, and operate HIL (Hardware In Loop) systems to validate mechanical, electrical, and hydraulic PLC software and related control logic for heavy equipment.

              

            REQUIREMENTS:

            • B.S. degree in Computer Engineering, Mechanical Engineering, Electrical Engineering, or Mechatronics
            • 2 years of experience with Hardware In Loop (HIL) system engineering experience in an Engineering environment, or equivalent combination of education and experience
            • Knowledge of HIL system architecture and hardware solutions
            • HIL system software tools such as dSPACE Control Desk, Automation Desk, and Synect
            • Knowledge of embedded systems/PLC for testing and debugging
            • Ability to design and develop plant models, test scenarios, and HIL automation scripts
            • System modeling and Matlab/Simulink experience
            • Ability to create schematics for system operation and design
            • Experience with Project Management software, e.g. MSProject
            • CAD and 3D modeling software, preferably Creo
            • Knowledge of algebra, probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry
            • Knowledge of fractions, percentages, ratios
            • Excellent communication skills
            • Ability to travel nationally and domestically 20% of the time
            • Must have valid driver's license and ability to obtain passport

             

             

            EOE  M/F 

             


             

             

             

                    

             

              



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            SHIPYARD REPAIR WORKERS w. Active Confidential Clearance

            25 CONTRACT POSITIONS

            LOCATION: NORFOLK, VA

             

            CTR is currently recruiting for Ship Repair Workers with Active Confidential Clearance.

            •   Red Badge Shipfitters                                            
            •   Red Badge Sheetmetal Mechanics                                            
            •   Red Badge Pipefitters                      
            •   Red Badge Outside Machinists
            •   Red Badge Formica Workers                                             

             Must hold a Confidential Clearance. Must be RapidGate eligible.

            Recent US Navy Personnel strongly encouraged to apply. We pay referral bonuses.

             

            EOE M/F 



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            MANUFACTURING ENGINEERS, Entry-Level or Mid-Level

            2 DIRECT-HIRE POSITIONS with Excellent Benefits

            INDUSTRY: MANUFACTURING

            LOCATION:  NEWPORT NEWS, VA

            SALARY: $60K - $90K

            Generous Relocation Assistance is available 

             

            SUMMARY:

            Seeking two Mid-Level or Entry-Level Manufacturing Engineers who will participate in all functions in the facility to support the manufacture and assembly of heavy industrial products and the development of processes and equipment for new products and improvement in the overall product delivery system. Will be working in Assembly area, so fastening, root cause analysis, process flows will be important tasks. Will work in a small group setting on diverse projects.

             

             REQUIREMENTS:

            • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering or similar discipline
            • 2 yeas of Prior Manufacturing or Plant experience preferred, but will also consider no experience
            • Proficiency in MS Office Products
            • Strong background in Assembly and Fastening operations
            • Knowledge of heavy equipment manufacturing processes
            • Ability to calculate and plan manpower and equipment utilization
            • Able to plan and manage projects and schedule and organize employees and their tasks
            • Able to meet productivity standards
            • Math skills: able to calculate discounts, interest, commissions, percentages, circumference, and volume
            • Apply basic algebra and geometry
            • Must have CAD knowledge/experience to perform tooling drawings
            • ProEngineer or 3D design software knowledge a plus
            • Must have driver's license
            • Able to obtain a passport
            • Able to obtain Safety certification (MSHA hazard training

             

            EOE M/F

             

             

             

             

             

             

             

              



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            AUTOMOTIVE TECHNICIANS with Active Secret Clearance

            2 TEMP-HIRE POSITIONS (after 90 Days)

            LOCATION: WILLIAMSBURG, VA

            PAY RATE: $26.20 per Hour, which includes Health Insurance Benefits 

            Day Shift, 40 hours per week, with minimal overtime

             

             SUMMARY:

            Serve as Automotive Technician on passenger carrying vehicles, trucks, and trailers of all sizes. service, repair, and overhaul various types of vehicles.

             

            REQUIREMENTS:

            • High School diploma or equivalent with minimum 3 years of related experience
            • Must have experience working on passenger vehicles
            • Read and understand technical manuals
            • Operate forklift trucks, roll back wreckers, flatbed trucks, and other various types of equipment
            • Able to lift up to 50lbs
            • Active Secret Clearance required

             

             

            EOE  M/F

             

             



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            PRODUCTION SUPERVISOR, Wood Products Manufacturing

            A DIRECT-HIRE POSITION with Excellent Benefits

            INDUSTRY: MANUFACTURING

            LOCATION:  BELLINGHAM, WA

            SALARY RANGE: $70K - $75K 

            Relocation assistance available for non-local candidate  

            Must be able to work shifts which rotate every 2 months:

              First Shift:       6am - 4pm

              Second Shift:  5pm - 3:30am 

             

            SUMMARY:

            Will be working under the direction of the Production Manager, supervising about 30 employees per shift in a wood manufacturing plant. Will be responsible for employee discipline  holding employees accountable, placing the right people in appropriate jobs, cross training. Support Plant Safety Awareness. Participate in Lean and Continuous Improvement initiatives.
             

            REQUIREMENTS:

            • High school diploma or equivalent required. Associate degree in related discipline or industry training preferred.
            • 2+ years of production supervisory experience
            • Manufacturing experience required
            • Wood manufacturing experience strongly preferred
            • 2 years of experience with plant safety training
            • Very knowledgeable in OSHA standards and compliance
            • Lean and/or Six Sigma experience preferred
            • Good computer skills and knowledge of MS Office programs

            Additional qualifications desirable:

            Forklift certification, First Aid, Confined Space, Fall Arrest, Heavy Equipment Operator, Train the Trainer certification. 

               

                       

              EOE M/F

               

               

               

               

               

                



              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

              Recruiter: Heidi Elam       
              eMail a friend about this job

              CNC MACHINISTS: PRODUCTION

              2 DIRECT-HIRE POSITION with Excellent Benefits

              INDUSTRY: MANUFACTURING

              LOCATION: NEWPORT NEWS

              Must be able to work nights and weekends:  7pm-7am. Will train on day shift and then transition to nights.

               

              SUMMARY:

              Responsible for day-to-day operation and troubleshooting of metal machining equipment and processes used to produce precision components for assembly into various products manufactured in the plant.

               

               REQUIREMENTS:

              • High school diploma or GED required
              • Minimum 2 years of work experience in operation and troubleshooting of metal turning and fabrication equipment
              • Experience with automatic screw machines is desirable
              • Able to utilize basic shop floor math and basic writing skills
              • Proficient in basic Metric to English unit conversions
              • Working knowledge of SPC (Statistical Process Control) desirable
              • Must be able to read and work from blueprints, engineering drawings using geometric dimensioning and tolerancing

               

              EOE  M/F 

               



              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

              Recruiter: Heidi Elam       
              eMail a friend about this job

              MECHANICAL ENGINEER: Automotive 

              A DIRECT- HIRE POSITION with Excellent Benefits

              INDUSTRY: MANUFACTURING

              LOCATION: NEWPORT NEWS, VIRGINIA

              SALARY RANGE: $75K - $90K

              Relocation Assistance Available when Applicable 

              SUMMARY:

              Will develop, design, and test mechanical components and systems in the production of large vehicles.

               

              REQUIREMENTS:

              • Bachelor's degree in Mechanical Engineering, Master's degree preferred 
              • 2-6 years of work-related experience, but exceptional recent graduates might be considered
              • Two years of Pro-E experience and 2 years of Mechanical Engineering experience
              • Knowledge of modeling tools
              • Knowledge of Algebra, probability and statistical inference, geometry and trigonometry
              • Ability to calculate fractions, percentages, ratios, and proportions
              • FEA experience would be a plus
              • Vehicle experience of any type
              • Student project ("Mini Baja Program" or any other type of race car program)
              • Personal interest in cars desired
              • MS Office proficiency

               EOE  M/F 

               

               

               


               

                



              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

              Recruiter: Heidi Elam       
              eMail a friend about this job

              ENGINEERING TECHNICIAN / CAD OPERATOR

              A TEMP-HIRE POSITION

              INDUSTRY: MANUFACTURING

              LOCATION: NEWPORT NEWS

              PAY RATE: $18-24 per hour


               

               REQUIREMENTS:

              • Experience using CMM's (Coordinate Measuring Equipment)
              • Inspection and measurement of products
              • First article inspection reports
              • Experience with 3 CAD programs, preferably Solidworks and AutoCAD
              • Able to take dimensions from customers' 2D drawings
              • Manufacturing experience a plus
              • AQL experience a plus
              • Strong math and communication skills
              • Strong computer skills, incl. MS Office (Word, Excel and Outlook)
              • Familiarity with Graphic design programs, i.e. Adobe Illustrator or Corel Draw would be a plus
              • Will be asked to operate heavy machinery such as Mold Machine, CNC Machine.

               

              EOE M/F



              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

              Recruiter: Heidi Elam       
              eMail a friend about this job

              POWDER COATER

              A DIRECT-HIRE or TEMP-HIRE POSITION

              INDUSTRY: MANUFACTURING

              LOCATION: NEWPORT NEWS

              1st Shift Position: 7am-3:30pm and

               Overtime Available

              PAY RANGE: $12-16 per hour 

               

              REQUIREMENTS:

              • Previous powder coating experience required
              • Comfortable working in a fast-paced environment
              • Able to work in fast paced Assembly, packaging, loading and unloading powder coating conveyor
              • Able to inspect parts for quality
              • Assembly experience, using hand tools
              • Strong math skills required
              • Strong mechanical skills and a high level of productivity are a must
              • Must be able to take direction

               

              EOE M/F 




              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

              Recruiter: Heidi Elam       
              eMail a friend about this job

              LANDSCAPERS 

              SEVERAL TEMP-HIRE POSITIONS (after 90 days)

              INDUSTRY: HOSPITALITY / RESORT 

              LOCATION: WILLIAMSBURG

               

              REQUIREMENTS:

              • Responsible for mowing grasses and edging
              • Cleaning areas around the pool and patios
              • Pull weeds as necessary
              • Mulching, trimming shrubs and trees
              • Miscellaneous other tasks
              • Valid driver's license
              • Good driving record

               EOE  M/F

               

               

               

               

               

               

               

               

               



              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

              Recruiter: Heidi Elam       
              eMail a friend about this job

              WAREHOUSE SUPERVISOR

              A TEMP-HIRE POSITION with Excellent Benefits

              INDUSTRY: MANUFACTURING

              LOCATION: NEWPORT NEWS, VA

              SALARY RANGE: $60K - $85K

              Relocation Assistance Available when Applicable. 

              A 1st Shift Positon


               

              SUMMARY:

              Responsible for supervising team in the logistics / warehouse facility. Responsible for planning, organizing and overseeing daily warehouse activity while maintaining company productivity and quality goals. Will be in charge of Receiving, Inventory Control, Order Picking and Shipment.

              Manage daily schedules and organize resources to ensure on time delivery, receipts and shipments. Offer suggestions for improvement of warehouse process. Schedule equipment repairs to maintain safety. Conduct audits and correct substandard performance. Maintain OSHA compliance on local, state and Federal level. Ensure employee training and coaching is continuous to meet company standards.

               The ideal Warehouse Supervisor would have Distribution and Manufacturing Experience, 5-10 years of work experience, B.S. degree, Good Presentation Skills, Good ERP Skills. 

               

              REQUIREMENTS:

              • Associate degree and 5 years of Logistics/Warehouse experience OR equivalent combination of education and work experience
              • Able to lift up to 25lbs and up to 75lbs with aid
              • Overnight travel may be required on occasion
              • Valid driver's license required
              • Must be able to obtain forklift certification
              • Pass drug screening
              • Pass background check

               

              EOE M/F 

               

               

               

               

               

               



              To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

              Recruiter: Heidi Elam       
              eMail a friend about this job

              notices...

              Now you can join our. . .
              Talent Network
              • Sign up for job alert emails
              • Search by location
              • Apply online
              • Submit your resume